• Topic ID: id_15460116
  • Version: 4.0
  • Date: Jan 20, 2020 8:31:53 PM

Auto Alignment Light Setting

Prerequisites

Overview

The “Auto Alignment Light” is a function that automatically turns on the Gantry Alignment Light by pressing Table foot switch when the gantry is at home position.

If the gantry is not at home position, neither the alignment light turns on nor gantry rotates.

This function is supported by the following products:

  • Optima CT660 system with 11HW34.16 or later software

  • VCT FREEdom (13HW31.x or later)

1 Enable procedure

Procedure

  1. Open Unix shell.
  2. Type cd /usr/g/GEfirm , press Enter key.
  3. Type setAutoAlignmentLight , press Enter key.
  4. Type 1 , press Enter key.
  5. Restart application or reboot the system.

2 Disable procedure

Procedure

  1. Open Unix shell.
  2. Type cd /usr/g/GEfirm , press Enter key.
  3. Type setAutoAlignmentLight , press Enter key.
  4. Type 0 , press Enter key.
  5. Restart application or reboot the system.
    note:

    This setting is saved/restored by System State.

3 Finalization

No finalization steps.