• Topic ID: id_18480430
  • Version: 2.0
  • Date: Dec 21, 2018 2:36:11 AM

(16HW45.1) Service Pack 2.0 Installation Procedure

1 Personnel Requirements

2 Procedure Overview

This procedure describes 16HW45.1 Service Pack 2.0 installation procedure.

3 Preliminary Requirements

3.1 Tools and Test Equipment

No tools or test equipment required

3.2 Consumables

No consumables required

3.3 Replacement Parts

No replacement parts required

3.4 Safety

No general safety information

3.5 Required Conditions

4 Procedure

4.1 Check software version currently installed

Confirm that the base software version is 16HW45.1 with Service Pack1.0 as follows.

  1. Open a Unix shell.

  2. Type swhwinfoENTER

  3. Verify that the base software version as follows

    16HW45.1_SP1-0-1.<hw info (example H40_PN_CM64_G_GMV) >

    If not, upgrade the system at first.

4.2 Service Pack Installation

  1. If application software is up, perform Application Shutdown from Common Service Desktop.

  2. Open a Unix shell.

  3. In the Unix Shell, become root:

    1. {ctuser@hostname} su -

    2. Password: <password>

  4. Insert the Service Pack CD into DVD drive in the host.

  5. Perform the following steps to install the Service Pack.

    1. [root@hostname]# patch_install -c Enter

    2. The following message is displayed.

      note:

      The message may be different from below depending on the service pack already installed.

      These patches from cdrom will be installed:

      16HW45.1_GEHCServicePack2.0

      -------------------------------------------

      I will install update 16HW45.1_GEHCServicePack2.0 from CDROM, is this ok ? [y/n]

    3. Type yEnter to install Service Pack 2.0

    4. Confirm “Update 16HW45.1_GEHCServicePack2.0 has been installed successfully” message.

  6. Check Software Version:

    1. Type: [root@hostname]# swhwinfoENTER

    2. System should reply with a response similar to the following （ignore that the software version is mismatch)

      16HW45.1_SP2-0-2.<hw info (ex. H40_PN_CM64_G_GTL) >

  7. Remove the Service Pack CD from Host DVD drive.

  8. Reboot the system:

    [root@hostname]# reboot Enter

  9. Perform Flash download.

5 Finalization

  1. Perform sanity scans (Scout, Helical, Axial, Cine).

  2. Confirm that all scans are successful and images are displayed.

6 Appendix - How to uninstall Service Pack

Notice Image
  • notice
  • Performing this task overwrites the current User Protocol

  1. If the following software options are installed, uninstall them at first:

    • DAP -DigtalProcessing

    • DAP -ASiR-V

    • DAP -MAR

  2. If Application software is up, perform Application Shutdown from Common Service Desktop.

  3. Open a Unix shell.

  4. In the Unix Shell and becomes to root:

    1. {ctuser@hostname} su -

    2. Password: <password>

  5. Perform the following steps to uninstall the Service Pack.

    1. [root@hostname]# patch_install -u Enter

    2. Verify that the following message is displayed.

      The following patches are installed on system:

      ----------------------------------------------

      16HW45.1_GEHCServicePack2.0

      16HW45.1_GEHCServicePack1.0

      ----------------------------------------------

      I will uninstall update 16HW45.1_GEHCServicePack2.0, is this ok? [y/n]

    3. Type y Enter to uninstall Service Pack 2.0.

    4. Verify that the following message is displayed.

      Update 16HW45.1_GEHCServicePack2.0 has been uninstalled successfully.

      -----------------------------------------------------------------------------

      I will uninstall update 16HW45.1_GEHCServicePack1.0, is this ok? [y/n]

    5. Type nEnter not to uninstall Service Pack 1.0

  6. Check Software Version:

    1. Type: [root@hostname]# swhwinfoENTER

    2. System should reply with a response similar to the following:

      16HW45.1_SP1–0–1<hw info (ex. H40_PN_CM64_G_GTL) >

  7. Perform the following post uninstall steps:

    [root@hostname]# reboot Enter