Topic ID: id_16157830
Version: 2.0
Date: Apr 9, 2020 8:50:04 PM

Slipring Power Supply Assembly Replacement

Prerequisites

Table 5. Safety

warning

Potential for Shock
Voltage may be present.
Use proper lockout/tagout procedures before replacing components. See safety menu of Service Document gui for appropriate procedures.

Notice Image

notice

Follow ALL required safety and PPE procedures customary for your organization when working on this product.

Overview

This procedure describes the Slipring Power Supply Assembly Replacement.

Procedure

Remove gantry covers as required.

Refer to Parts Replacement > Gantry > Enclosure > (Cover Removal Procedure).
Using the hex socket, remove two (2) cap screws from the back side of supply located on the rear right fan assembly.
Remove safety plate.
Disconnect wiring.
Replace the slipring power supply assembly.

Finalization

Perform System Scanning Test (located in Functional Checks > System folder).