• Topic ID: concept_axc_hqp_hlb
  • Version: 3.0
  • Date: Nov 27, 2020 2:04:17 AM

Recon Enhancement Option Installation

1 Overview

This procedure describes the Enhanced Recon Option Installation.

This option requires GPU Fluoro prerequisite. If it's not installed, install the GPU Fluoro prerequisite first.

2 Material List

For the CT SW 18BW42.xx or early, please install Recon Enhancement option (B78462CA) by DVD-RAM. See Table 1.

For the CT SW 20BW15.xx or later, please install Recon Enhancement option (B77322DA) by e-license. See Table 2.

3 Installation Procedure

  1. Confirm that System started up normally.
  2. Then install the option using Configuration -> Install Options menu, and check the option is installed from Configuration -> Verify Install Options menu.

4 Finalization

  1. Execute sanity scan and confirm the scan completed and image is generated without error.
  2. Attach the name plate near the rating plates.
    1. For TIO/NIO Console, please attach the name plate near the rating plates on the rear cover.
    2. For OpenOC Console, please attach the name plate on the right cover.