• Topic ID: id_15460206
  • Version: 3.0
  • Date: Jun 15, 2020 11:00:18 PM

Fuse Replacement Procedures

Prerequisites

Overview

Procedure

  1. Make sure to follow all Lockout/Tagout requirements while performing this procedure.
  2. Replace the fuse by referring the fuse location and rating in Table 6.

    Figure 1. Fuse - Power PAN

    Figure 2. Fuse - Choke assembly

    Figure 3. Fuse - Heat exchanger

    Figure 4. Fuse - Axial Dynamic Break

    Figure 5. Fuse - CFC

  3. Remove all Lockout/tagout devices installed.
  4. Restore power to the system

Finalization

  1. Perform a [System Scanning Test] from the [Functional Checks] menu of the service manual to ensure system operation.