Sample Camera Logs

1 lclog - Laser Camera Log

Successful Camera Initialization
User_Msg... CODE----> 301
#301fname = /usr/g/ctuser/film/img41a000QY
arg_copies = 1arg_format = 4x3_fidddasm952 interface was loaded...Set_Vendor_Bits...LcSyscall: cmd 30
scsisleep duration=100000000nsLcgetResponse: ready 1
Set_12_Line_Border pass...
LcSyscall: cmd a4
LcgetResponse: ready 1
Clear_Alarm...LcSyscall: cmd 85
LcgetResponse: ready 1
Request_Status Called...LcSyscall: cmd 96
LcgetResponse: ready 1
LcSysrep: resp ``STA,1,RDY''
LcSysrep(RQS): status160->STA,1,RDY
LcSysrep: RDYLcSysrep():ALM 1,log_msg: code = 1 (logged_error = 0)
LcSyscall: cmd 82
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(ALI): status160->PAS
Allocate_Device OK
opening data file /usr/g/ctuser/film/img41a000QYSet_Greyscale...
LcSyscall: cmd a5
LcgetResponse: ready 1
Start of Print Job
STATISTICS*************START PRINTING FILM****************/usr/g/ctuser/film/img41a000QYLcSyscall: cmd 90
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(MAT): status160->PAS
LcSyscall: cmd a3
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(LUT): status160->PAS
LcSyscall: cmd 9f
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(WIM): status160->PAS
Lc_clear_all:CMI...LcSyscall: cmd 86
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(CLR): status160->PAS
Start of Image Acquisition Process
lc_load_and_acquire: img->image_sx=512lc_load_and_acquire: img->image_sy=512lc_load_and_acquire: img->image_psize=0.000000main : zoomd = 0, zoomh = 0
set_zoomd : ...set_zoomf...loading file /usr/g/ctuser/film/img41a000QYxxL952_vdbSetFormat pass...format = 12 zoom = 0.000000
set_zoomd : ...set_zoomf...L952_vdbSetFormat leavingOLD SYTLE IMAGE ACQUISITION, NO RING BUFFERINGentering rbL952_lcamStore: fname = /usr/g/ctuser/film/img41a000QY, num_imgs=12, hdrlen =632entering rbL952_lcamStore: image_sx = 512,image_sy =512, image_deep= 8rbL952_lcamStore: nbchuncks = loop_var = 16 nblocks= 512 image_size =262144ACQUIRE IMAGE... Image_ID = 1
LcSyscall: cmd 84
LcgetResponse: ready 0
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(AQU): status160->PAS
ACQUIRE IMAGE... Image_ID = 2

Comment: The above 6 steps are repeated for each succeeding Image Acquisition. Image acquisition completed, begin Printing

LcSysrep(AQU): status160->PAS
L952_vdbPrint: format = 12 print_copies = 1Define_Zone: format = 12set_zoomd : ...set_zoomf...xxDefine_Zone: format = 12 nb_zone = 4 nb_image_line 3xxDefine_Zone: set_zoomd = 0.000000 , set_zoomf = 0.000000scan_ssparam = dd
xxDefine_Zone scanned ssparam = ddxxDefine_Zone: images_id[0] = 1xxDefine_Zone: images_id[1] = 2xxDefine_Zone: images_id[2] = 3Request_Status Called...LcSyscall: cmd 96
LcgetResponse: ready 1
LcSysrep: resp ``STA,1,RDY''
LcSysrep(RQS): status160->STA,1,RDY
LcSysrep: RDYLcSysrep():ALM 1,log_msg: code = 1 (logged_error = 0)
LcSyscall: cmd 8b
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(DZO): status160->PAS
xxDefine_Zone scanned ssparam = ddxxDefine_Zone: images_id[0] = 5xxDefine_Zone: images_id[1] = 6xxDefine_Zone: images_id[2] = 7Request_Status Called...LcSyscall: cmd 96
LcgetResponse: ready 1
LcSysrep: resp ``STA,1,RDY''
LcSysrep(RQS): status160->STA,1,RDY
LcSysrep: RDYLcSysrep():ALM 1,log_msg: code = 1 (logged_error = 0)
LcSyscall: cmd 8b
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(DZO): status160->PAS
xxDefine_Zone scanned ssparam = ddxxDefine_Zone: images_id[0] = 9xxDefine_Zone: images_id[1] = 10xxDefine_Zone: images_id[2] = 11Request_Status Called...LcSyscall: cmd 96
LcgetResponse: ready 1
LcSysrep: resp ``STA,1,RDY''
LcSysrep(RQS): status160->STA,1,RDY
LcSysrep: RDYLcSysrep():ALM 1,log_msg: code = 1 (logged_error = 0)
LcSyscall: cmd 8b
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(DZO): status160->PAS
xxDefine_Zone scanned ssparam = ddxxDefine_Zone: images_id[0] = 13xxDefine_Zone: images_id[1] = 14xxDefine_Zone: images_id[2] = 15Request_Status Called...LcSyscall: cmd 96
LcgetResponse: ready 1
LcSysrep: resp ``STA,1,RDY''
LcSysrep(RQS): status160->STA,1,RDY
LcSysrep: RDYLcSysrep():ALM 1,log_msg: code = 1 (logged_error = 0)
LcSyscall: cmd 8b
LcgetResponse: ready 1
LcSysrep: resp ``PAS''
LcSysrep(DZO): status160->PAS
Lc_set_up_to_print call...nbcopies= 1LcSyscall: cmd 9a
LcgetResponse: ready 1
LcSysrep: resp ``STC''
LcSysrep(STP): status160->STC
LcSysrep(STP): STC OK...
EXPOSE...
LcSyscall: cmd 8d
LcgetResponse: ready 1
LcSysrep: resp ``PTC''
LcSysrep(EXP): status160->PTC
camscan: (17:75 to 8b) 0x72 EXP 0xd 0x6 EOE 0xd & 0xa 0xb 0xc PTC 0xd & 0xa 0xb 0xc 0xa
camscan: dcr's 1
LcSysrep(EXP): DCR...print_copies = 0User_Msg... CODE----> 353
#353

Comment: End of Print Job

STATISTICS:******END OF THIS JOB /usr/g/ctuser/film/img41a000QY Ready To Print new*******Release_Device...LcSyscall: cmd 95
LcgetResponse: ready 1
User_Msg... CODE----> 350
#350

2 dcplog - Dicom Print Log

dcplog Sample Output of a Successful 1on1 Film Job.

note:

The output is broken up into sections with key film session actions. The dcplog includes the use of these acronyms in the following example:

SCP

Service Class Provider: The camera, a receiver of images.

SCU

Service Class User: The OC scanner, has ability to send images

calling AE title

dcm_bind: AETitle = engbay26_DCP

called AE title - hostname - IP address port number of printer

map_app_title: title IMN host engctn1 ip-addr 3.7.52.164 port 2104

Print SCU (on the OC) requests an association with print SCP (print server at camera) using the IP address, port number and AE title. The SCU proposes abstract syntaxes (in this case print service class) along with transfer syntaxes used for each syntax and PDU transfer rate.

EstablishAssoc: DCM_OPEN_REQ Action success

The Print SCP responds with an association acceptance. If the association has been accepted, the Dicom parameters (host, IP, AE, port correctly configured):

EstablishAssoc: OPEN_CONF received

The SCU sends an NGET request to the SCP for printer status:

Starting the print session

The SCP returns an NGET response status and printer status to the SCU:

note:

IF the SCP returns a NORMAL status to the SCU, the job continues.
If the SCP returns an ERROR status to the SCU, the print job will fail.
If the SCP returns a WARNING status, the job may fail or continue depending on status info. See table for list of supported status.

NgetService: Event Received: DCM_NGET_END
NgetService: Event Received: DCM_DATA

Table 1. Printer Events
PRINTER STATUS
SOP uid
Instance uid
Printer status	NORMAL
status info
printer_name	advt
manufacturer	AGFA
model	ADVT
device serial number	123456
software version	Version 2.0
AETitle	IMN

The SCU sends an NCREATE request to the SCP to create the film session. The Film session presentation consists of copies, priority of job, medium type, and film destination:

NcreateService: NCREATE BEG Action Success
NcreateService: DCM DATA Action Success
NcreateService: Waiting for Event
NcreateService: Event received: DCM_RETURN_BUFF
NcreateService: Waiting for Event

The SCP returns Ncreate RSP status to SCU along with instance uid for film session:

NcreateService: Event received: DCM_NCREATE_END
NcreateService: Status is : 0
film session instance uid 1.3.51.1
film session instance uid 1.3.51.1
filmbox ref sop uid 1.3.51.1

The SCU sends NCreate RQ to the SCP to create the film box. The presentation includes film format, orientation, magnification, film size:

NcreateService: NCREATE BEG Action Success
NcreateService: DCM DATA Action Success
NcreateService: Waiting for Event

The SCP returns NCREATE RSP status to the SCU along with referenced sop instance uid for film box and referenced SOP instance uids for each image box:

NcreateService: Event received: DCM_RETURN_BUFF
NcreateService: Waiting for Event
NcreateService: Event received: DCM_NCREATE_END
NcreateService: Waiting for Event
NcreateService: Event received: DCM_DATA
filmbox instance uid 1.3.51.1.1

SCU sends NSET RQ to the SCP to set the image box. The presentation includes instance uid, image position on the film, number of Rows, Columns, Bits, and image pixel data:

NsetService: Event Received: DCM_RETURN_BUFF

SCP returns NSET RSP status to the SCU along with affected sop instance uid for image box:

NsetService: Event Received: DCM_NSET_END
Image Attributes set

The SCU and SCP repeat the NSET RQ and NSET RSP for the image boxes until all images have been sent to the SCP. When all images have been sent, the SCU, it sends NACTION RQ to the SCP to print the film box with instance uid generated during the NCREATE. The SCP returns NACTION RSP to print the film:

NactionService: Event received: DCM_NACTION_END
NactionService: Event received: DCM_DATA
parse_data_set returned status 0x0
Film Box sent to printer N - Action

The SCU sends NDELETE RQ to the SCP to delete the film box with instance uid generated during the NCREATE. SCP returns NDELETE RSP to delete the film box and returns the sop Instance of the film job:

NdeleteService: Event Received : DCM_NDELETE_END
Film box instance deleted
ref SOP C uid 1.2.840.10008.5.1.1.14
ref SOP I uid 1.3.51.1.1.1.1
Print Session successfully completed

The SCU sends RELEASE RQ to the SCP to release the association:

req close assoc
CloseAssoc: DCM_CLOSE_REQ Action Success

The SCP returns RELEASE RP to release association:

close accepted

3 prslog - Printer Server Log

Table 2. prslog Output
LOCATION	DESCRIPTION
OC: `/usr/g/ctuser/logfiles/prslog`	This is a running history log of print server initializations and shutdowns, and print jobs are started and completed.
Example prslog output
Successful print server initialization:
`MESSAGE from Process 1639>> Tue Aug 18 13:10:38 1998`	`[Server]> initialization in progress for port PRSserver`
`MESSAGE from Process 1639>> Tue Aug 18 13:10:38 1998`	`[Server]> ...initialization completed for port PRSserver`
`MESSAGE from Process 1674>> Tue Aug 18 13:11:02 1998`	`[PRSserver]> Hello, I’m the print server, still alive on host engbay13`
Successful print jobs running:
`MESSAGE from Process 1799>> Tue Aug 18 13:15:56 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1799>> Tue Aug 18 13:16:21 1998`	`Printed Ex: 1472 Se: 103 Im: 1`
`MESSAGE from Process 1799>> Tue Aug 18 13:16:21 1998`	`[PRSserver]> Completed print job: Ex: 1472 Se: 103 Im: 1`
`MESSAGE from Process 1817>> Tue Aug 18 13:16:50 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1817>> Tue Aug 18 13:17:16 1998`	`Printed Ex: 1472 Se: 103 Im: 25`
`MESSAGE from Process 1817>> Tue Aug 18 13:17:16 1998`	`[PRSserver]> Completed print job: Ex: 1472 Se: 103 Im: 25`
`MESSAGE from Process 1825>> Tue Aug 18 13:17:41 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1825>> Tue Aug 18 13:18:06 1998`	`Printed Ex: 1472 Se: 103 Im: 49`
`MESSAGE from Process 1825>> Tue Aug 18 13:18:06 1998`	`[PRSserver]> Completed print job: Ex: 1472 Se: 103 Im: 49`
`MESSAGE from Process 1831>> Tue Aug 18 13:18:33 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1831>> Tue Aug 18 13:18:59 1998`	`Printed Ex: 1472 Se: 103 Im: 73`
`MESSAGE from Process 1831>> Tue Aug 18 13:18:59 1998`	`[PRSserver]> Completed print job: Ex: 1472 Se: 103 Im: 73`
Print server shutdown from Applications being brought down:
`MESSAGE from Process 1639>> Tue Aug 18 14:48:34 1998`	`[Server]> Caught signal : 2`
`MESSAGE from Process 1674>> Tue Aug 18 14:48:35 1998`	`[Server]> Caught signal : 2.`
`MESSAGE from Process 1639>> Tue Aug 18 14:48:41 1998`	`[Server]> terminated`
Successful print server initialization:
`MESSAGE from Process 1598>> Tue Aug 18 14:53:43 1998`	`[Server]> initialization in progress for port PRSserver`
`MESSAGE from Process 1598>> Tue Aug 18 14:53:43 1998`	`[Server]> ...initialization completed for port PRSserver`
`MESSAGE from Process 1636>> Tue Aug 18 14:54:09 1998`	`[PRSserver]> Hello, I’m the print server, still alive on host engbay13`
`MESSAGE from Process 1902>> Tue Aug 18 15:15:40 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1902>> Tue Aug 18 15:16:06 1998`	`Printed Ex: 1476 Se: 2 Im: 1`
`MESSAGE from Process 1902>> Tue Aug 18 15:16:06 1998`	`[PRSserver]> Completed print job: Ex: 1476 Se: 2 Im: 1`
`MESSAGE from Process 1926>> Tue Aug 18 15:17:10 1998`	`[PRSserver]> Print job started`
`MESSAGE from Process 1926>> Tue Aug 18 15:17:35 1998`	`Printed Ex: 1476 Se: 2 Im: 16`
`MESSAGE from Process 1926>> Tue Aug 18 15:17:35 1998`	`[PRSserver]> Completed print job: Ex: 1476 Se: 2 Im: 16`

4 camera.dev (AGFA DICOM Print Camera)

Enter the following:

{ctuser@bayXX}[5] cd /usr/g/ctuser/app-defaults/devices ENTER
{ctuser@bayXX}[6] cat camera.dev ENTER

Table 3. camera.dev Contents Listing
`CAMERA.DEV` CONTENTS LISTING	DESCRIPTION
`set dName {Dicom Camera}`	Sets the name that appears in manual composer and scanRx autofilm setup
`set dType digital`	Refers to 1 of {postscript, analogue, or digital}. For DICOM the dType is set to digital.
`set dQueueType DICM`	Refers to the Job type; can be {LP=postscript, LC=laser camera, or DICM} for DICOM print cameras.
`set ctype {Imation Print Server}`	DICOM camera type selected during Camera Installation
`set dQueueName dicom`	Sets the name that appears in the Filming Queue
`set defaultFormat 4x3_fid`	Default format for manual composer selected during Camera Installation
`set dHostName agfacamera`	Hostname of the print server entered during Camera Installation
`set dAppTitle DRYSTAR`	AE title of the print server entered during Camera Installation
`set medType BLUE`	Medium type selected during Camera Installation - can be one of BLUE FILM, CLEAR FILM, or PAPER - this element is sent during NCREATE of the Film Session.
`set destination MAGAZINE`	The destination for printed film selected in during Camera Installation. Can be one of MAGAZINE, PROCESSOR - this element is sent during NCREATE of the Film Session.
`set filmOrientation PORTRAIT`	The Orientation of image boxes on film selected during Camera Installation can be one of LANDSCAPE or PORTRAIT - this element is sent during NCREATE of the Film Box.
`set magType CUBIC`	The magnification of film selected during Camera Installation. Can be one of REPLICATE, BILINEAR, CUBIC, or NONE - this element is sent during NCREATE of the Film Box.
set minDensity 5 set maxDensity 300 set borderDensity BLACK set emptyDensity BLACK set smoothType 140 set configuration PERCEPTION_LUT=200	These elements are sent during the NCREATE of the Film Box and will set the following values: sets minimum Optical Density - film and camera type dependent. sets Maximum Optical Density - film and camera type dependent. sets border density sets empty image density sets the smoothing type when magType is set to CUBIC sets configuration info. This value differs for all camera vendors who typically define the LUT for contrast.
pformat 1x1_fid pformat 2x1_fid pformat 2x2_fid pformat 3x2_fid pformat 3x3_fid pformat 4x3_fid pformat 5x3_fid pformat 4x4_fid pformat 5x4_fid	Manual film composer and auto film formats note: DICOM defines film format as column vs. row, as opposed to GE’s Laser film format definition of row vs. column.

5 SdCPHosts (DICOM Print Only)

Enter the following:

{ctuser@bayXX}[2] cd /usr/g/ctuser/Prefs ENTER
{ctuser@bayXX}[3] cat SdCPHosts ENTER

Table 4. SdCPHosts Contents Listing Example
`SDCPHOSTS` CONTENTS LISTING EXAMPLE	DESCRIPTION
`3.7.52.164`	The IP address of the camera, entered during Camera Installation
`camera`	The hostname of the camera, entered during Camera Installation
`PRINTSCP`	The AE (Applications Entity) Title, entered during Camera Installation
`2106`	The TCP Listen Port number, entered during Camera Installation
`ctn display`	A comment entered in the network comment field of Camera Installation.