| LightSpeed 7.X Service Methods, Direction 5193574-800 |
| Rev |
Date |
Reason for Change |
| 37 |
May 11, 2022 |
Replacement > Table Added Table Speaker Replacement |
| 36 |
Dec 16, 2021 |
Safety Updated Torque Wrench Information per CAPA-00013143
Troubleshooting > X-Ray Generation Added Pressure Recovery Kit Procedure, Updated X-Ray Generation Error Codes (Gen).
Part List > Gantry Part List Updated Gantry Part List
Planned Maintenance and Tasks Updated Inner link Clean Tube Heat Exchanger, Heat Exchanger Pump Inspection
|
| 35 |
June 16, 2020 |
Installation > Chapter 2 -Installation Summary > Mechanical Installation Summary Updated STEP 9B: Install Gantry Alignment Laser and Bracket.
Software (GOC6.6) > Software Installation Procedures (LFC) > Updated (16HW36.x) GOC6.6 Z840 VCT Load From Cold.
Troubleshooting > X-ray Generation Added Air Bubble Removal for HP100, RT, VCT/HD, Discovery VCT/Discovery 690 Systems.
Replacements > Console (GOC6.5) Updated GOC6 and GOC6.5 Hardware Replacement Kit (Z840) Installation Manual, added GOC6 and GOC6.5 Hardware Replacement Kit (Z840) for China Installation Manual.
Replacements > Console (GOC6) Updated GOC6 and GOC6.5 Hardware Replacement Kit (Z840) Installation Manual, added GOC6 and GOC6.5 Hardware Replacement Kit (Z840) for China Installation Manual.
Replacements > Console (GOC5) Added GOC5 Hardware Replacement Kit (Z840) Installation Manual, GOC5 Hardware Replacement Kit (Z840) for China Installation Manual.
Replacements > Gantry > DAS and Detector Added Simple Clamp Replacement Manual (Dir 5826675-1EN).
Replacements > Gantry > Tube Updated Tube Replacement.
Replacements > Table Added GT Top Side Cover Bracket Replacement.
|
| 34 |
September 30, 2019 |
Software (GOC6.6) > Software Installation Procedures (LFC) > Added (16HW36.4) Service Pack 3.1 Installation Procedure.
Troubleshooting > Table Added GT Trouble Shooting.
Replacement > Gantry > DAS and Detector Updated FRDM Replacement Procedure.
Replacement > Gantry > DAS and Detector Updated Interposer Replacement Procedure.
|
| 33 |
December 19, 2018 |
Installation > Upgrades Updated LightSpeed VCT (GOC6.6 Z840) Console Upgrade. Align, Setup, Calibrations > Console (GOC6.6) Added Z840 CMOS Battery Replacement, BIOS Settings and ROM Flashing.
Align, Setup, Calibrations > Gantry Added Configuring Gantry Tilt for Extender Removal.
Software (GOC6.6) > Added Password Change Procedure.
Software (GOC6.6) > Software Installation Procedures (LFC) > Added (16HW36.4) Service Pack 3.0 Installation Procedure.
Troubleshooting > Console (GOC6.6) Added DMPR Reference Image Configuration.
Planned Maintenance and Tasks Added PM Overview, Warranty PM (1 Time/Year During Warranty Period), Out of Warranty PM (3 Times/Year Alternating Schedules).
|
| 32 |
September 26, 2018 |
Safety Updated Equipment Service - Lockout-Tagout-PPE.
Pre-Installation Updated Pre-Installation Manual: LS 7.X (5116410-100).
Installation > Option Updated 3-Phase Partial UPS Installation, Cardiac Monitor (IVY) Installation, Monitor In-Room Boom Install (Dir 5323332-1EN).
Align, Setup, Calibrations > Gantry > Collimator Updated Collimator Calibration.
Align, Setup, Calibrations > Gantry > Tube Updated Filament Calibration, Cold ISO Alignment, Z-Alignment.
Align, Setup, Calibrations > Gantry Updated Gantry Balance Procedure.
Align, Setup, Calibrations > System Updated Fast Calibration, Detailed Calibration.
Align, Setup, Calibrations > Table Updated Cradle Motor and Cradle Drive Belt Tension Adjustment, Elevation Potentiometer Belt Tension Adjustment, IMS Belt Tension Adjustment.
Functional Checks Updated System Scanning Test, Quality Assurance Test.
Functional Checks > Console GOC6.6 Updated Peripheral Tower Functional Test.
Functional Checks > Gantry Updated Meter Verification.
Theory > Console (GOC6.6) Updated (Z840) Console Theory.
Replacements > Console (GOC6.6) Updated Host Computer (Z840) NIC Card Replacement, Host Computer (Z840) System/Image HDD Replacement.
Replacements > Gantry > High Voltage Updated Securing HV Cable.
Replacements > Gantry > Tube Updated Tube Replacement.
|
| 31 |
November 07, 2017 |
Installation > Upgrades Updated Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT, Liquid Bearing Tube IB Two-Step Upgrade for VCT (GOC6.6 Z840), Liquid Bearing Tube IB One-Time Upgrade for VCT (GOC6.6 Z840). Software (GOC6.6) > Added Liquid Bearing Tube Service Tool Impact, VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Software (GOC6.6) > Software Installation Procedures (LFC) > Added (13HW31.8) Service Pack 2.1 Installation Procedure, (16HW36.x) Service Pack 2.1 Installation Procedure.
Software (GOC6.5) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.4 Installation Procedure.
Software (GOC6) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.4 Installation Procedure.
Software (GOC5) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.4 Installation Procedure.
|
| 30 |
October 19, 2017 |
Safety Updated Liquid Bearing Tube Safety. Align, Setup, Calibrations Updated Liquid Bearing Tube Service Tool Impact. Added VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Align, Setup, Calibrations > Console (GOC6.6) Updated System Configuration.
Functional Checks Updated Liquid Bearing Tube Service Tool Impact. Added VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Software (GOC6.5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6.5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.3 Installation Procedure, (12HW14.6) Service Pack 2.4 Installation Procedure.
Software (GOC6) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6) Software Installation Procedures (LFC) > Added (12HW14.6) Service Pack 2.3 Installation Procedure, (12HW14.6) Service Pack 2.4 Installation Procedure.
Software (GOC5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC5) Software Installation Procedures (LFC) > Addded (12HW14.6) Service Pack 2.3 Installation Procedure, (12HW14.6) Service Pack 2.4 Installation Procedure.
Theory Updated Liquid Bearing Tube Service Tool Impact. Added VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Theory > Gantry > X-Ray Generation Updated Liquid Bearing Tube Service Tool Impact.
Troubleshooting Updated Liquid Bearing Tube Service Tool Impact. Added VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Troubleshooting > X-Ray Generation Updated Rotor Control Tool for LB Tube (VCT).
Part List Updated Gantry Parts List.
Replacements Updated Liquid Bearing Tube Service Tool Impact. Added VCT Liquid Bearing Tube Rotor Control Thermal Guidance for Hot landing prevention.
Replacements > Console (GOC6.6) Updated LCD Monitor Replacement.
Replacements > Console (GOC6.5) Updated LCD Monitor Replacement, VeRB 1 or 2 Replacement with DIG-VeRB Common Computer.
Replacements > Console (GOC6) Updated VeRB 1 or 2 Replacement with DIG-VeRB Common Computer.
Replacements > Gantry > Collimator Updated Mylar Window Removal.
Replacements > Gantry > ORP and TGPU Updated ORP Replacement.
Replacements > Gantry > Tube Updated Tube Replacement, Tube Replacement (VCT LB Tube) - HCSDM00 (HCSDM00475429).
Planned Maintenance and Tasks > PM Data Reports Added Planned Maintenance Report Form.
|
| 29 |
May 23, 2017 |
Installation > Upgrades Updated Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT, Ball Bearing Tube Restoration Procedure for VCT. Functional Checks > Console GOC6.6 > Updated Peripheral Tower Functional Test (PMT-20/PMT-21/PMT-22).
Software (GOC6.6) Updated SSA License File Installation.
Software (GOC6.6) > Software Installation Procedures (LFC) Updated (13HW31.x) GOC6.6 VCT Load From Cold. Added (13HW31.x) Service Pack 2.0 Installation Procedure.
Theory > Console (GOC6.6) Updated LCD Video Monitor Overview.
Theory > Console (GOC6.5) Updated LCD Video Monitor Overview.
Theory > Console (GOC6) Updated LCD Video Monitor Overview.
Theory > Console (GOC5) Updated LCD Video Monitor Overview.
System Diagrams Updated Lightspeed 7.x Functional Interconnects.
Part List Updated GOC6.5 Parts list (VCT), GOC6 Parts list (VCT), Gantry Parts List, VCT LB Tube unique part.
Replacements > Console (GOC6.6) Updated GOC6.6 VCT Host Computer (Z820/Z840) Replacement, LCD Monitor Replacement.
Replacements > Console (GOC6.5) Updated LCD Monitor Replacement. Added GOC6 and GOC6.5 Hardware Replacement Kit (Z820) Installation and GOC6 and GOC6.5 Hardware Replacement Kit (Z840) Installation.
Replacements > Console (GOC6) Added GOC6 and GOC6.5 Hardware Replacement Kit (Z820) Installation and GOC6 and GOC6.5 Hardware Replacement Kit (Z840) Installation.
Replacements > Gantry > DAS and Detector Updated FRDM Replacement Procedure. Added FRDM Sulfur Plug Kit Installation.
|
| 28 |
February 16, 2017 |
Installation > Upgrades Updated LightSpeed VCT (GOC6.6 Z840) Console Upgrade, Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT. Software (GOC6.6) > Software Installation Procedures (LFC) Added (16HW36.x) Service Pack 2.0 Installation Procedure.
Replacements > GOC6.5 Added DIG 1 or 2 Replacement with DIG-VeRB Common Computer, VeRB 1 or 2 Replacement with DIG-VeRB Common Computer.
Replacements > GOC6 Added DIG 1 or 2 Replacement with DIG-VeRB Common Computer, VeRB 1 or 2 Replacement with DIG-VeRB Common Computer.
|
| 27 |
November 01, 2016 |
Installation > Upgrades Updated LightSpeed VCT FREEdom Console Upgrade, Ball Bearing Tube Restoration Procedure for VCT, LightSpeed VCT (GOC6.6 Z840) Console Upgrade, Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT. Added Liquid Bearing Tube IB Two-Step Upgrade for VCT (GOC6.6 Z840), Liquid Bearing Tube IB One-Time Upgrade for VCT (GOC6.6 Z840). Align, Setup, Calibrations Updated Liquid Bearing Tube Service Tool Impact.
Functional Checks Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6.5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6.6) > Software Installation Procedures (LFC) Added (16HW36.x) Service Pack 1.0 Installation Procedure.
Software (GOC6.5) > Software Installation Procedures (LFC) Updated (12HW14.6) GOC6 and 6.5 Load From Cold.
Software (GOC6) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6) > Software Installation Procedures (LFC) Updated (12HW14.6) GOC6 and 6.5 Load From Cold.
Software (GOC5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC5) > Software Installation Procedures (LFC) Updated (12HW14.6) LightSpeed VCT GOC5 Load From Cold.
Align, Setup, Calibrations Updated Liquid Bearing Tube Service Tool Impact.
Theory Updated Liquid Bearing Tube Service Tool Impact.
Troubleshooting Updated Liquid Bearing Tube Service Tool Impact.
Replacements Updated Liquid Bearing Tube Service Tool Impact.
Replacements > Gantry > High Voltage Updated High Voltage Tank Replacement.
|
| 26 |
October 26, 2016 |
Readme Added VCT GOC6.6 Z840 Service Software Tools Classification. Installation > Optons Updated AWE Connection Option Installation.
Installation > Upgrades Added LightSpeed VCT (GOC6.6 Z840) Console Upgrade.
Align, Setup, Calibrations > Console (GOC6.6) Updated System Configuration.
Software (GOC6.6) Added SSA License File Installation.
Software (GOC6.6) > Software Installation Procedures (LFC) Updated (13HW31.x) GOC6.6 VCT Load From Cold. Added (16HW36.x) GOC6.6 Z840 VCT LFC Quick Guide, (16HW36.x) GOC6.6 Z840 VCT Load From Cold.
Theory > Console (GOC6.6) Added (Z840) Console Theory.
Part List Added GOC6.6 Z840 Parts List (VCT).
Replacements > Console (GOC6.6) Updated GOC6.6 VCT Host Computer (Z820/Z840) Replacement, Added Host Computer (Z840) DVD Drive Replacement, Host Computer (Z840) FDIP Card Replacement, Host Computer (Z840) Memory Replacement, Host Computer (Z840) NIC Card Replacement, Host Computer (Z840) Power Supply Replacement, Host Computer (Z840) Display GPU Card Replacement, Host Computer (Z840) Recon GPU Card Replacement, Host Computer (Z840) RAID Controller Card Replacement, Host Computer (Z840) Scan Data HDD Replacement, Host Computer (Z840) System/Image HDD Replacement.
Planned Maintenance and Tasks > 3 Times PM / Year Added Planned Maintenance Schedule W.
Planned Maintenance and Tasks > PM Data Reports Updated Planned Maintenance Forms ALL Schedules.
|
| 25 |
September 15, 2016 |
Software (GOC6.5) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.1 Installation Procedure. Added (12HW14.6) Service Pack 2.2 Installation Procedure. Software (GOC6) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.1 Installation Procedure. Added (12HW14.6) Service Pack 2.2 Installation Procedure.
Software (GOC5) > Software Installation Procedures (LFC) Updated (12HW14.6) Service Pack 2.1 Installation Procedure. Added (12HW14.6) Service Pack 2.2 Installation Procedure.
|
| 24 |
July 19, 2016 |
Safety Added Environmental Health & Safety (EHS) Information. Updated Liquid Bearing Tube Safety. Installation > Upgrades Updated Ball Bearing Tube Restoration Procedure for VCT, Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT.
Align, Setup, Calibrations Updated Liquid Bearing Tube Service Tool Impact.
Align, Setup, Calibrations > Console (GOC6.5) Updated System Configuration (12HW14.6 SP2.1 or later).
Align, Setup, Calibrations > Console (GOC6) Updated System Configuration (12HW14.6 SP2.1 or later).
Align, Setup, Calibrations > Console (GOC5) Updated System Configuration (12HW14.6 SP2.1 or later).
Align, Setup, Calibrations > Gantry > Tube Updated Cold ISO Alignment.
Functional Checks Updated Liquid Bearing Tube Service Tool Impact.
Functional Checks > Gantry Updated Gantry Rotation Safety Check.
Software (GOC6.5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6.5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.1 Installation Procedure. Updaded (12HW14.6) GOC6 and 6.5 Load From Cold.
Software (GOC6) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC6) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.1 Installation Procedure. Updaded (12HW14.6) GOC6 and 6.5 Load From Cold.
Software (GOC5) Updated Liquid Bearing Tube Service Tool Impact.
Software (GOC5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.1 Installation Procedure. Updated (12HW14.6) LightSpeed VCT GOC5 Load From Cold.
Theory Updated Liquid Bearing Tube Service Tool Impact.
Troubleshooting Updated Liquid Bearing Tube Service Tool Impact.
Troubleshooting > X-Ray Generation Updated Rotor Control Tool for LB Tube (VCT).
Replacements Updated Liquid Bearing Tube Service Tool Impact.
Replacements > Gantry > High Voltage Updated High Voltage Tank Replacement.
Replacements > Gantry > Tube Updated Tube Replacement (VCT LB Tube).
|
| 23 |
May 19, 2016 |
Safety Updated Normal System Operational Safety. Added Liquid Bearing Tube Safety. Pre-Installation Updated Pre-Installation Manual: LS 7.X (5116410-100).
Installation > Upgrades Added Liquid Bearing Tube IB Two-Step Upgrade for VCT, Liquid Bearing Tube IB One-Time Upgrade for VCT, Ball Bearing Tube Restoration Procedure for VCT.
Align, Setup, Calibrations Added Liquid Bearing Tube Service Tool Impact.
Align, Setup, Calibrations > Console (GOC6.5) Added System Configuration (12HW14.6 SP2.0 or later).
Align, Setup, Calibrations > Console (GOC6) Added System Configuration (12HW14.6 SP2.0 or later).
Align, Setup, Calibrations > Console (GOC5) Added System Configuration (12HW14.6 SP2.0 or later).
Align, Setup, Calibrations > Gantry > Tube Updated Cold ISO Alignment, Z-Alignment.
Align, Setup, Calibrations > Gantry Updated Gantry Balance Procedure.
Functional Checks Added Liquid Bearing Tube Service Tool Impact.
Functional Checks > Gantry Updated Collimator Functional Diagnostic Tests, Gantry Rotation Safety Check.
Software (GOC6.5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.0 Installation Procedure, Liquid Bearing Tube Service Tool Impact.
Software (GOC6) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.0 Installation Procedure, Liquid Bearing Tube Service Tool Impact.
Software (GOC5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 2.0 Installation Procedure, Liquid Bearing Tube Service Tool Impact. Updated (12HW14.6) LightSpeed VCT GOC5 Load From Cold.
Theory Added Liquid Bearing Tube Service Tool Impact.
Theory > Gantry > X-Ray Generation Added Liquid Bearing Tube Service Tool Impact.
Troubleshooting Added Liquid Bearing Tube Service Tool Impact.
Troubleshooting > Console (GOC6.6) Added Aegis SSA Key Work around for older CT systems Software.
Troubleshooting > X-Ray Generation Added gesyslog for LB Tube (VCT), Rotor Control Tool for LB Tube (VCT).
Part List Added VCT LB Tube unique part.
Replacements Added Fuse Replacement Procedures, Liquid Bearing Tube Service Tool Impact.
Replacements > Gantry > Collimator Updated Collimator Assembly Replacement.
Replacements > Gantry > DAS and Detector Updated FRDM Replacement Procedure, Added Interposer Replacement Procedure .
Replacements > Gantry > Enclosure Updated Gantry Top Covers & Fan Removal (Removable Fans).
Replacements > Gantry > Tube Updated Tube Replacement.
Replacements > Table Added Link Bar Assembly Replacement .
Planned Maintenance and Tasks Removed 4 Times PM / Year.
Planned Maintenance and Tasks > 3 Times PM / Year Updated Planned Maintenance Schedule A, Planned Maintenance Schedule B, Planned Maintenance Schedule C.
|
| 22 |
July 17, 2015 |
Align, Setup, Calibrations > Gantry > Enclosure Updated Alignment Light Adjustment. Align, Setup, Calibrations > Gantry > Tilt Updated Gantry Tilt Pot Adjustment.
Functional Checks > Gantry Updated Alignment Lights Visual Checks, Gantry Rotation Safety Check.
Troubleshooting > Console (GOC6.6) Updated GOC6.6 VCT MIsc. Troubleshooting Information.
Troubleshooting > Gantry Updated Collimator Cleaning Procedure, Slipring Brush Disconnects Troubleshooting.
Replacements > Console (GOC6.6) Updated GOC6.6 VCT Host Computer (Z820) DVD Drive Replacement.
Replacements > Gantry > Axial Updated 2010 Axial Drive Brake Resistor Replacement, 2010 Axial Drive Controller Replacement, 2010 Axial Drive KIM Board Replacement, 2010 Axial Drive Power Supply Replacement.
Replacements > Gantry > Collimator Updated Collimator Control Board (CCB) Replacement.
Replacements > Gantry > DAS and Detector Updated Detector Thermistor Replacement, DIFB Chassis EMC Strip Replacement, FRDM Replacement Procedure, Heater Controller and Fan Controller Replacement, Backplane Replacement Procedure, DAS and Detector Air Filter Replacement, DAS Fan, Fan Plate Assembly Replacement, DCB and DIFB Replacement, Detector Air Plenum Removal and Installation, Detector Replacement Procedure, Detector Window Replacement.
Replacements > Gantry > Enclosure Updated Service outlet and E-Stop Button Replacement.
Replacements > Gantry > Tilt Updated Tilt Potentiometer Replacement (New).
Planned Maintenance and Tasks Updated Planned Maintenance Schedule A, Planned Maintenance Schedule B, Planned Maintenance Schedule C. Deleted Planned Maintenance Schedule D.
Planned Maintenance and Tasks > PM Data Reports Updated Planned Maintenance Forms ALL Schedules.
|
| 21 |
February 16, 2015 |
Readme Updated CT/PET Common Glossary, Language Policy. Safety Updated ESD Grounding Locations, Important...X-Ray Protection.
Installation Updated Installation Forms.
Installation > Chapter 1 Updated Electrical Installation Work Flow.
Installation > Chapter 2 > Electrical Installation Summary Updated STEP E15: Save System State.
Installation > Chapter 8 - System Level Verification Tests Updated Install and Verify Customer Imaging Options.
Installation > Appendix B Updated Install Covers.
Installation > Appendix D Updated Installation Forms.
Installation > Options Updated ASiR Option Manual (Dir 5436607-1EN), AWE Connection Option Installation, Monitor In-Room Boom Install (Dir 5323332-1EN), SmartStep Option Installation. Added ConnectPRO Software Option Installation and Checkout , Respiratory Gating Option Installation (Dir 5321869-1EN) .
Installation > Upgrades Updated LightSpeed VCT FREEdom Console Upgrade.
Align, Setup, Calibrations > Console (GOC6.6) Updated GSCB Configuration and Intercom Setup, LCD Video Monitor Setup, Z820 Host PC BIOS Setup. Added Dose Check Management and EA3 Configuration.
Align, Setup, Calibrations > Console (GOC6.5) Updated LCD Video Monitor Setup.
Align, Setup, Calibrations > Console (GOC5) Updated Evaluation of Dose SR Compatibility (for 07MW18.4 SP4.0) . Added Data Privacy (EA3 User Authorization) Configuration , Dose Check Management and EA3 Configuration.
Align, Setup, Calibrations > Gantry > Tube Updated Filament Calibration.
Align, Setup, Calibrations > Table Updated Cradle Motor and Cradle Drive Belt Tension Adjustment, Elevation Potentiometer Belt Tension Adjustment, IMS Belt Tension Adjustment.
Functional Checks > Console GOC6.6 Updated GSCB and Intercom Functional Checks, Peripheral Tower Functional Test (PMT-20/PMT-21).
Functional Checks > Gantry Updated Meter Verification.
Software (GOC6.6) > Software Installation Procedures (LFC) Updated 13HW31.x GOC6.6 VCT Load From Cold.
Software (GOC6.5) > Software Installation Procedures (LFC) Updated (12HW14.6) GOC6 and 6.5 Load From Cold, (11HW12.5 or 11MW4.1) GOC6 Series Load From Cold.
Software (GOC6.6) > System Utilities Updated Linux Commands.
Software (GOC6) > Software Installation Procedure (LFC) Updated (12HW14.6) GOC6 and 6.5 Load From Cold, (11HW12.5 or 11MW4.1) GOC6 Series Load From Cold.
Software (GOC6) > System Utilities Updated Linux Commands.
Software GOC5 > Software Installation Procedures (LFC) Updated 07MW18.4 Service Pack 2.0 Installation (Dir 5309078-1EN), 07MW18.4 Service Pack 3.0 Installation (Dir 5234957-30-1EN). Added 07MW18.4 Service Pack 4.0/4.1 Installation .
Software GOC5 > System Utilities Updated Linux Commands.
Theory > Console (GOC6.6) Added LCD Video Monitor Overview.
Theory > Console (GOC6.5) Added LCD Video Monitor Overview.
Theory > Console (GOC6) Added LCD Video Monitor Overview.
Theory > Console (GOC5) Added LCD Video Monitor Overview.
Troubleshooting > Console (GOC6.6) Updated GOC6.6 / NIO64 Console Network Switch (CNS) Troubleshooting.
Troubleshooting > Image Quality Added How to setup Low Signal correction.
Troubleshooting > Table Updated GTCB Error Code List (in gesyslog).
Part List Updated Gantry Parts List, Table Parts List, VCT 7.X Misc. Items Parts List.
Replacements > Console (GOC6.6) Updated GOC6.6 VCT Host Computer (Z820) Memory Replacement. Added LCD Monitor Replacement.
Replacements > Console (GOC6.5) Updated HSDA Controller Module Replacement. Added LCD Monitor Replacement.
Replacements > Console GOC6 Updated HSDA Controller Module Replacement.
Replacements > Console GOC5 Updated HP Host Computer Hard Drive Exchange.
Replacements > Gantry > DAS and Detector Updated FRDM Replacement Procedure.
Replacements > Gantry > Enclosure Updated Gantry Front Cover Removal and Re-Install, Gantry Side Covers Removal and Re-Install, Gantry Cover Replacement, Gantry Rear Cover Removal and Re-Install.
Replacements > Gantry > High Voltage Updated High Voltage Tank Replacement. Added Heat Exchanger Fan Replacement.
Replacements > Gantry > ORP and TGPU Updated TGPU Power Supply Replacement.
Replacements > Gantry > Tilt Added Tilt Potentiometer Replacement (New).
Replacements > Table Updated Removal / Installation of Table Covers. Added RIM IMS Cover Set Replacement.
Planned Maintenance and Tasks Updated Planned Maintenance Schedule D.
|
| 20 |
December 18, 2013 |
Installation > Options Added AWE Connection Option Installation. Installation > Upgrades Updated LightSpeed VCT FREEdom Console Upgrade.
Align, Setup, Calibrations > Console (GOC6.6) Updated GSCB Configuration and Intercom Setup.
Align, Setup, Calibrations > Gantry > Enclosure Added Auto Alignment Light Setting.
Software (GOC6.6) Updated Z820 RAID Disk Clear Configuration Procedure.
Software (GOC6.6) > Software Installation Procedures (LFC) Udated 13HW31.x GOC6.6 VCT Load From Cold. Added (13HW31.8) Service Pack 1 Installation Procedure.
Software (GOC6.5) > Software Installation Procedures (LFC) Udated (12HW14.6) GOC6 and 6.5 Load From Cold
Software (GOC6) > Software Installation Procedures (LFC) Updated (12HW14.6) GOC6 and 6.5 Load From Cold.
Software (GOC5) > Software Installation Procedures (LFC) Updated (12HW14.6) LightSpeed VCT GOC5 Load From Cold.
Theory > Console (GOC6.6) Updated GOC6.6 VCT Console Theory.
Part List Updated GOC6.6 Parts List (VCT).
Replacements > Console GOC6 Updated GOC6.6 VCT Host Computer (Z820) Replacement, Z820 RAID Controller Replacement, Z820 System or Image Hard Drive Replacement,
|
| 19 |
October 10, 2013 |
Safety Added Equipment Service - GOC6.6 Console . Installation > Options Added ASiR Option Installation.
Installation > Upgrads Added LightSpeed VCT FREEdom Console Upgrade .
Align, Setup, Calibrations Added Console (GOC6.6) folder.
Functional Checks Added Console (GOC6.6) folder.
Software (GOC6.6) Added this folder.
Theory Added Console (GOC6.6) folder.
System Diagrams Updated Lightspeed 7.x Functional Interconnects and GOC6 Series Console Schematic 5212920SCH.
Troubleshooting Added Console (GOC6.6) folder.
Part List Added GOC6.6 Parts List (VCT).
Replacements Added Console (GOC6.6) folder.
|
| 18 |
September 11, 2013 |
Readme Updated CT/PET Common Glossary. Safety Updated Equipment Service - GOC6 and 6.5 Consoles.
Installation > Options Updated Cardiac Monitor (IVY) Installation.
Align, Setup, Calibrations > Console (GOC6.5) Updated Data Privacy (EA3 User Authorization) Configuration, and Dose Check Management and EA3 Configuration.
Align, Setup, Calibrations > Console (GOC6) Updated Dose Check Management and EA3 Configuration, and Data Privacy (EA3 User Authorization) Configuration.
Align, Setup, Calibrations > Gantry > Enclosure Updated Alignment Light Adjustment and Alignment Light Characterization.
Align, Setup, Calibrations > Gantry Updated Gantry Balance Procedure.
Functional Checks Updated Quality Assurance Test .
Functional Checks > Gantry Updated Gantry Rotation Safety Check, Meter Verification, and zalignmentWizard User Instructions.
Software (GOC6.5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 1.1 Installation Procedure.
Software (GOC6) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 1.1 Installation Procedure.
Software (GOC5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack 1.1 Installation Procedure.
System Diagrams Updated GOC6 Series Console Schematic 5212920SCH.
Troubleshooting > Diagnostics Updated Scan Data Path Diagnostic.
Troubleshooting > Image Quality Updated Scan Analysis.
Replacements > Console GOC6 Updated HP xw8400 Lower Level FRU Replacement.
Replacements > Console GOC5 Updated HP xw8400 Lower Level FRU Replacement.
Replacements > Gantry > Collimator Updated Collimator Filter Removal and Replacement.
Replacements > Gantry > DAS and Detector Updated FRDM Replacement Procedure.
Replacements > Gantry > Enclosure Updated Laser Light Replacement.
Replacements > Gantry > High Voltage Updated High Voltage Tank Replacement and Inverter Replacement.
Replacements > Gantry > Tilt Updated Hydraulic Tilt Motor Assembly Replacement.
Replacements > Gantry > Tube Updated Tube Replacement.
Planned Maintenance and Tasks Updated Planned Maintenance Schedule A, Planned Maintenance Schedule D, and PM Data Reports.
|
| 17 |
May 17, 2013 |
Safety Updated Equipment Service - FRU Parts Management and Torque Wrench Information. Installation Updated Installation Forms.
Installation > Appendix D Updated Installation Forms.
Software (GOC6.5) > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack Installation Procedure. Updated (12HW14.6) GOC6 and 6.5 Load From Cold and Install Software Options.
Software (GOC6) > Software Installation Procedure (LFC) Added (12HW14.6) Service Pack Installation Procedure. Updated (12HW14.6) GOC6 and 6.5 Load From Cold and Install Software Options.
Software GOC5 > Software Installation Procedures (LFC) Added (12HW14.6) Service Pack Installation Procedure. Updated (12HW14.6) LightSpeed VCT GOC5 Load From Cold.
Replacements > Console GOC5 Updated HP xw8200 Lower Level FRU Replacement.
Replacements > Gantry > Axial Updated Axial Encoder Assembly Replacement.
|
| 16 |
13 July 2012 |
Pre-Installation Updated the Pre-Installation Manual (5116410-100 Rev 19)
Align, Setup, Cals > GOC6.5 Added Product Locator.
Align, Setup, Cals > GOC6 Added Product Locator.
Align, Setup, Cals > GOC5 Added (12HW14.5) System Configuration and Product Locator.
Software GOC6.5 > Software Installation Procedures (LFC) Added (12HW14.6) GOC6 and GOC6.5 Load From Cold, and (12HW14.6) GOC6 and GOC6.5 System State Save Restore.
Software GOC6 > Software Installation Procedures (LFC) Added (12HW14.6) GOC6 and GOC6.5 Load From Cold, and (12HW14.6) GOC6 and GOC6.5 System State Save Restore.
Software GOC5 > Software Installation Procedures (LFC) Added (12HW14.6) GOC5 Load From Cold, and (12HW14.6) GOC5 System State Save Restore.
Software GOC5 > Software Installation Procedures (LFC) > LFC Related Procedures Added (12HW14.6) System Configuration.
Parts Updated GOC6.5 Parts List, GOC6 Parts List, and GOC5 Parts List.
Replacements Updated Certified Component Verification Form e4879.
Replacements > Console GOC5 Updated Disk Array (JBOD) FRU Replacements and VDARC Replacement or Reload.
|
| 15 |
March 12, 2012 |
Readme Updated Damage in Transportation
Pre-Installation Updated LightSpeed 7X Pre-Installation Manual 5116410-1EN Rev 18.
Installation > Options Updated Monitor-In-Room Boom Installation 5323332-1EN Rev 2.
Installation > Upgrade Updated LightSpeed VCT Xtream HD Console Upgrade.
Align, Setup and Cals > Console GOC6 Series Updated Evaluation of Dose SR Compatibility, Evaluation of Image Flip and Rotate Compatibility, LCD Video Monitor Setup, and System Configuration.
Align, Setup and Cals > Gantry Updated Tube Install Certification.
Functional Checks Added Patient Touch and System Chassis Leakage Test.
Functional Checks > GOC6 Series Updated Peripheral Tower Functional Test.
Software (GOC6 Series) > Software Installation Procedure (LFC) Updated (10MW44.4) GOC6 Series System State Save Restore, (11HW12.5 or 11MW4.1) GOC6 Series System State Save Restore and Install Software Options.
Software (All Series) > System Utilities Updated Linux Commands.
Theory > Console (GOC6 and GOC5) Updated DVD Tested Media.
Theory > Table Updated Global Table Theory.
Troubleshooting > X-Ray Generation Updated No Load kV Test and Rotor Diagnostic Test.
Replacements Updated Certified Component Replacement Guidance.
Replacements > Console (GOC6 Series) Updated HSDA HDD Replacement and LCD Monitor Replacement.
Replacements > Gantry Updated IPC Replacement.
Replacements > Gantry > Collimator Updated Cam Drive Motor and Flex Coupling Replacement, and Collimator Assembly Replacement.
Replacements > Gantry > DAS and Detector Updated FRDM Replacement Procedure.
Replacements > Gantry > Display Updated Breathing Light Assembly Replacement.
Replacements > Gantry > High Voltage Updated High Voltage Tank Replacement, Inverter Replacement and JEDI PPC Board Replacement.
Replacements > Gantry > Tube Updated Tube Replacement.
Replacements > Table Updated Cradle Encoder Spool Wire Replacement, Cradle Lock Assembly Replacement, Cradle Motor and Clutch Assembly Replacement, Cradle Replacement, GTCB Replacement, GTCN Replacement, IMS Bearing Block Replacement, Linear Scale Assembly Replacement, Rear Touch Sensor Plate Replacement, Touch Sensor Left Assembly Replacement and Touch Sensor Right Assembly Replacement.
Planned Maintenance Updated Planned Maintenance Schedule A, Planned Maintenance Schedule B, Planned Maintenance Schedule C, and Planned Maintenance Schedule D.
Planned Maintenance > Reports Updated PM Schedule Reports A-D.
|
| 14 |
June 30, 2011 |
Pre-Installation Updated LightSpeed 7X Pre-Installation Manual 5116410-1EN Rev 17.
Installation
Updated De- Installation Procedure.
> Chapter 3 > Gantry and Table Updated Drilling the Gantry and Table Anchor Holds and Anchor the System.
> Chapter 4 Updated Console Cable Connections - GOC6.
> Chapter 6 Updated Install Software Options and Complete Computer Integration.
> Chapter 8 Updated Save System State and Patient Touch and System Chassis Leakage Tests.
> Options Added SmartStep Option Installation .
Align, Setup, Cals
> Console GOC6.5 Added Dose Check Management and EA3 Configuration, and Data Privacy (EA3 User Authorization) Configuration. Also, updated System Configuration.
> Console GOC6 Added Dose Check Management and EA3 Configuration, and Data Privacy (EA3 User Authorization) Configuration. Also, updated System Configuration.
> Gantry > Tilt > Updated Hydraulic Tilt Motor Fluid Check and Fill Procedure.
Functional Checks Updated System Scanning Test.
Software GOC6.5 > Software Installation Procedures (LFC) Added (11HW12.5 or 11MW4.1) GOC6 Series System State Save Restore and (11HW12.5 or 11MW4.1) GOC6 Series Load From Cold.
Software GOC6 > Software Installation Procedures (LFC) Added (11HW12.5 or 11MW4.1) GOC6 Series System State Save Restore and (11HW12.5 or 11MW4.1) GOC6 Series Load From Cold.
Troubleshooting
>Gantry Added Common Fan Controller (CFC) Fuse Troubleshooting.
> Image Quality Updated Streak Test.
> X-Ray Generation Added No Load Kv Test.
Parts List Updated GOC6.5 and GOC6.
Replacement > Gantry
> DAS and Detector > Updated FRDM Replacement Procedure.
> Tilt Updated Tilt Hydraulic Motor Assembly Replacement.
> High Voltage Updated Heat Exchanger Pump Replacement.
Planned Maintenance and Tasks Updated Planned Maintenance Schedule A,Planned Maintenance Schedule B, Planned Maintenance Schedule C, .and Planned Maintenance Schedule D.
> Schedule A, Schedule D link to > Updated Grease Main Bearing.
> Schedule C link to > Updated Gantry Encoder Inspection.
|
| 13 |
March 4, 2011 |
Readme Updated CT/PET Common Glossary.
Installation Updated Revision History, Appendix B “Body Step E!8: Install Covers.
Upgrades Updated LS VCT Xtreme HD Console Upgrade
Align, Setup, Cals> Console (GOC6.5) Updated z400 Host PC BIOS Setup, and System Configuration.
Align, Setup, Cals> Console (GOC6) Updated System Configuration.
Software (GOC6.5) > Software Installation Procedures (LFC) Updated (10MW44.4) GOC6 Series Load From Cold; Added (11MW04.1) GOC6 Series System State Save Restore, (11MW04.1) GOC6 Series LFC Quick Guide, and (11MW04.1) GOC6 Series Load From Cold.
Software (GOC6) > Software Installation Procedures (LFC) Updated (10MW44.4) GOC6 Series Load From Cold; Added (11MW04.1) GOC6 Series System State Save Restore, (11MW04.1) GOC6 Series LFC Quick Guide, and (11MW04.1) GOC6 Series Load From Cold.
Theory > Console (GOC6.5) Updated GOC6.5 Console Theory, High Speed Disc Array (HSDA) Theory, and GOC 6.5 (HP z400) Host Computer.
Theory > Console (GOC6) Updated GOC6 Console Theory, and High Speed Disc Array (HSDA) Theory.
Troubleshooting > Console (GOC6.5) Updated Console Network Switch Troubleshooting
Troubleshooting > Console (GOC6) Updated Console Network Switch Troubleshooting
Replacement > Console (GOC6.5) Updated Console Network Switch Replacement, HSDA HDD Replacement.
Replacement > Console (GOC6) Updated Console Network Switch Replacement, HP xw8400 Lower Level FRU Replacement, and HSDA HDD Replacement.
Replacement > Console (GOC5) Updated HP xw8200 Lower Level FRU Replacement, and HP xw8400 Lower Level FRU Replacement.
Replacement > Gantry >DAS and Detector Updated FRDM Replacement Procedure.
Replacement > Gantry > High Voltage Updated Inverter Replacement.
Planned Maintenance Updated Planned Maintenance Schedule D.
|
| 12 |
November 19, 2010 |
Readme Updated Damage in Transportation.
Pre-Installation Updated manual 5116410–100 Rev 16.
Installation Updated Installation Forms — e4879 Installation Data Verification Form Rev 9, Pre-Delivery Activities, Gantry/Table Interference Test and Table Tilting Dolly Install Guide. Installation > Revision History will reflect Rev 19.
Upgrades Updated GOC6 Console — VeRB Upgrade, and LS VCT Xtreme HD Console Upgrade.
Align, Setup, Cals > Console GOC6.5 Updated DIG2 BIOS CMOS Settings, System Configuration.
Align, Setup, Cals > Gantry > Tube Updated Cold ISO Alignment, Z-Align, Tube Install Certification.
Functional Checks > Console Updated Peripheral Tower Functional Test.
Software (GOC6.5 and GOC6) > Software Installation Procedures Updated (10MW06.5) GOC6 Series Load From Cold, (10MW44.4) GOC6 Series System Save State Restore, (10MW44.4) GOC6 Series Load From Cold, (10MW44.4) GOC6 Series LFC Quick Guide and Install Software Options.
Software > System Utilities Updated Linux Commands.
Theory > Console GOC6.5 Updated DIG2 Theory, GOC6.5 Console Theory and VeRB2 Theory.
Theory > Console GOC6 Updated GOC6 Console Theory.
Theory > Console GOC5 Updated xw8400 Host Computer.
System Diagrams Updated GOC6 Series Console Schematic 5212920SCH.
Troubleshooting > Console GOC6.5 updated Power Distribution Box Troubleshooting.
Troubleshooting > Console GOC6 Updated xw8400 Host PC Troubleshooting and Power Distribution Box Troubleshooting.
Troubleshooting > Console GOC5 Updated xw8400 Host PC Troubleshooting.
Troubleshooting > Image Quality Updated Artifacts Caused by Collimator Grease.
Parts Updated GOC6.5 Parts List and GOC6 Parts List
Replacement > GOC6.5 Updated Console Network Switch Replacement, DIG2 Replacement, DIG2 GPU Replacement, DIG2 SAS Controller Replacement, DIG2 DIP Card Replacement, DVD Peripheral Tower Replacement, GOC6.5 Host Computer Replacement, HSDA Chassis Replacement, HSDA HDD Replacement, HSDA Controller Module Replacement, ICOM Replacement, VeRB2 Replacement, VeRB2 GPU Replacement, Accessories Replacement.
Replacement > GOC6 Updated Console Network Switch Replacement, DIG Replacement, DIG GPU Replacement, DIG SAS Controller Replacement, DIG DIP Card Replacement, DVD Peripheral Tower Replacement, Host Computer Replacement, HP xw8400 Lower Level FRU Replacement, HSDA Chassis Replacement, HSDA HDD Replacement, HSDA Controller Module Replacement, HSDA PSU Replacement, HSDA Cooling Module Replacement, ICOM Replacement, VeRB Replacement, VeRB GPU Replacement, Accessories Replacement.
Replacement > GOC5 Updated HP xw8400 Lower Level FRU Replacement.
Replacement > Gantry > Axial Updated 2010 Axial Drive Assembly Replacement, Axial Drive Holding Brake Replacement, Axial Drive Module Replacement.
Replacement > Gantry > Collimator Updated Cam Drive Motor and Flex Coupling Replacement, Collimator Assembly Replacement, Collimator Control Board (CCB) Replacement.
Replacement > Gantry > High Voltage Updated Heat Exchanger Power Supply Replacement, Heat Exchanger Pump Replacement, HV Tank Replacement, Inverter Replacement, JEDI PPC Board Replacement, Securing HV Cable.
Replacement > Gantry > Tube Updated Tube Replacement.
Replacement > Table Updated Proportional Valve Assembly Replacement.
|
| 11 |
May 17, 2010 |
New Titan program - includes new format for Installation manual, the GOC6.5 console, Titan Gantry and 2010 Axial Drive. Readme Updated Omissions and Errors
Pre-Installation Developed separate chapters for Install and Pre-Install. Pre-Installation Manual updated.
InstallationInstallation Manual - New format, Forms - Updated with new format, Added new Table Tilting Dolly Install Guide.
Setiup, Align, Cals Updated Gantry Tilt Pot Adjustment.
Replacement > High Voltage Updated Inverter Replacement, High Voltage Tank Replacement.
Troubleshooting Added Mylar Window Check Troubleshooting.
|
| 10 |
December 15, 2009 |
Installation Updated LightSpeed 7.X Installation Manual, LightSpeed 7.X Pre-Installation Manual.
Installation > Upgrade Added LightSpeed VCT Xtream HD Console Upgrade.
Troubleshooting Added Assessment of Corrosive Atmospheric Conditions
Replacement Updated Detector Window Replacement, Heat Exchanger Power Supply Replacement, and Disk Array JBOD.
|
| 9 |
June 16, 2009 |
Replacement FCTge47203 Updated Certified Component Verification Form e4879. ECR2052951 Updated Disk Array JBOD Replacement.
|
| 8 |
April 29, 2009 |
Readme FCTge44057Updated CT/PET Common Glossary.
Safety PQR13225356Equipment Service FRU parts management
Installation Updated LightSpeed 7.X Installation Manual, LightSpeed 7.X Pre-Installation Manual, SmartStep Discovery Installation Manual.
Installation > FormsFCTge28674 Updated all e4879 GE Installation Forms.
Align, Setup, Cals > Console GOC6 PerFCTge36345, PQR13155339, FCTge32633, FCTge41058 updated System Configuration.
Troubleshooting FCTge44230Updated Autovoice Troubleshooting.
Troubleshooting > X-Ray GenerationPQR13236875 Added Tube Oil Cooling System Air Removal, Tube Oil Cooling System Heat Exchanger Compensation, Tube Oil Cooling System Flow Rate Measurement.
System Diagrams FCTge44230Updated Interconnects Drawing.
Replacement > Console PQR13225356xw8200 HP Lower Level FRU Replacement, HP Host computer replacement and PQR13238571 updated DIG DIP Card. PQR13185949.
Replacement > Gantry PQR13185949Balance Sensor Buffer Board Replacement.
Replacement > Gantry > Axial PQR13227127Axial Encoder Assembly Replacement.
|
| 7 |
December 16, 2008 |
README
Per NPi Program Help-dt search, Language Policy, References to Illustrations and Drawings
SAFETY : - Per SN08091016a & PQR 13186668 Removed Equipment Service - Non-Standard Parts and replaced with Equipment Service - FRU Parts Management.
- PQR 13182652
Equipment Service LOTO
- PQR 13205559
Equipment Service Chemical & Material
- Per NPi Program
Torque Wrench Information
INSTALL : - PQR 13195860
7X Installation Manual (5116411-100 Rev 15)
- PQR 13168182, FCTge36010, FCTge36007, FCTge29404
7X Pre-Installation Manual (5116410-100 Rev 12)
- PQR 13189592
De-Installation Manual (Dir 5272259-1EN Rev 2)
- PQR 13171341
e-4879 Installation Form
ALIGN, SETUP, CALIBRATIONS
PQR 13175395
ISO Alignment
Per NPi Program
Collimator Calibration, Intercom Adjustments, LCD Monitor Setup, Gantry Balance Procedure, xw8400 Host PC BIOS Setup
Align, Setup, Cals > Table : Removed Table Characterization Procedures
Moved from Replacement to Align, Setup and Cals
Cradle Motor and Cradle Drive Belt Tension Adjustment, Elevation Potentiometer Belt Tension Adjustment, and IMS Belt Tension Adjustment
SOFTWARE INSTALLATION
PQR 13155339, FCTge32633 & 41058
07MW18.4 SW LFC 7X
THEORY > CONSOLE
Per NPI program
Intercom Adjustments, LCD Video Monitor Overview, xw8400 Host Computer Theory
SYSTEM DIAGRAMS
Per NPI program 5115335SCH - GOC5 Interconnect
TROUBLESHOOTING > GANTRY
PQR 13205559
Collimator Cleaning procedure
Per NPi program
Autovoice Troubleshooting
> CONSOLE
Per NPi program , Host Commands and Troubleshooting, xw8400 Host PC Troubleshooting
PARTS
Updated: GOC5 Illustrated Parts List (Dir 5135498-100 Rev 11)
REPLACEMENT >CONSOLE
PQR 13217939
SCSI Tower Replacement
PQR13110508
HP Host Computer Replacement, HPHost Computer NIC Exchange, HP Host Computer Hard Drive Exchange
REPLACEMENT >GANTRY
PQR13193768
Tube Replacement - LightSpeed VCT
Per NPI program
Axial Encoder Assembly Replacement, TGPU Power Supply Replacement, TGPU Replacement
FCTge41235
Belt Removal and Installation
FCTge41237
Home Flag Sensor Board Assembly Replacement
PQR 13155079 and PQR 13168839
VCT Detector Plenum Upgrade
PQR 13126683
Cam Motor Drive and Flex Coupling
PLANNED MAINTENANCE > Procedures
PQR 13142781
Emergency OFF -Powerware 9155
|
| 6 |
April 8, 2008 |
Install : Updated "LightSpeed 7.X Installation Manual" Direction 5116411-100 Rev 14. > Options : Added "Advantage 4D Respiratory Gating Install (2380690-100)". |
| Align, Setup, Cals
|
| Software > Software Installation Procedures (LFC) : Removed obsolete "05MWxx.x SW LFC (LS7.X)" procedures. |
Align, Setup, Cals : - > Table : Added "Touch Sensor Positioning".
- >Gantry : Updated "Gantry Rotation Characterization"
Install: Updated "LightSpeed 7.X Installation Manual" Direction 5116411-100 Rev 14.
Troubleshooting > Console : Per PQR13141714 removed the following modules : - "Host Troubleshooting"
- "SCSI Tower Troubleshooting"
- "VDARC Troubleshooting"
- "VIG Node Command List"
- "VIG Node Reset"
- "VIG Troubleshooting"
Added the following modules :
-
"Host Commands and Troubleshooting"
-
"VCT Disk Array Commands and Troubleshooting"
-
"VDARC Node Commands and Troubleshooting"
-
"VIG Node Commands and Troubleshooting"
|
| Software > Software Installation Procedures (LFC) : Removed obsolete "05MWxx.x SW LFC (LS7.X)" procedures. |
| Troubleshooting > Image Quality : Updated "Artifacts Caused by Collimator Grease". |
Replacement-
> Gantry : Updated "TGPU Replacement" procedure. > Collimator : Updated "Collimator Assembly Replacement".
-
> Table : Added "Cradle Motor and Cradle Drive Belt Tension Adjustment"; "IMS Belt Tension Adjustment"; "Rear Touch Sensor Plate Replacement".
-
> Slipring : Updated "Slipring Platter Replacement".
|
| 5 |
Dec. 4, 2007 |
In addition to general procedure updates, the following major changes were made: |
| Readme : Added "Language Policy". |
| Safety : Updated "Torque Wrench Information". |
| Install : Updated "Pre-Installation Manual: LS 7.X (5116410-100)" to Rev 11 and "Installation Manual: LS 7.X (5116411-100)" to Rev 13. |
| Align, Setup, Cals > Gantry : Updated "CT Belt Tension Check & Adjustment". |
| Software > Software Installation Procedures (LFC) : Updated "07MW18.4 SW LFC (LS7.X)". |
| Theory > Console : Added "Serial Over LAN version 2 (5193458) Tutorial". |
| Troubleshooting: > X-Ray Generation : Updated "Shorted Inverter Test (Pro, RT, VCT)". |
| Parts : Updated the following chapters "IPL Introduction, Chapter 1"; “"GT Table IPL, Chapter 2"; "PDU IPL, Chapter 3"; "Gantry IPL, Chapter 4"; "Miscellaneous Items, Chapter 5" |
Replacement- > Console : Added "HP Host Computer NIC Exchange".
- > Gantry > High Voltage : Updated "HV Tank Replacement ".
- > Gantry > Slipring : Added "Slipring HV Capacitor Replacement".
|
| PM > PM Procedures > Gantry : Updated "CTPM-1308 (Grease Main Bearing)". |
| 4 |
May 23, 2007 |
In addition to general procedure updates, the following major changes were made: |
| Added applicable content from 5116423-800 - LightSpeed 7.X Service Information (Gen) into this publication so that 5116423-800 (and the 5116423-200 CD) can be obsoleted. |
| Readme : Added "References to Illustrations, Drawings and Pictures". |
| Safety : Added "Safety Alert Usage" and "Equipment Service - NGPDU". Updated "System Safety Overview" and "Equipment Service - Gantry". |
| Install (includes Pre-Installation) : Updated "Pre-Installation Manual: LS 7.X (5116410-100)" to Rev 10 and "Installation Manual: LS 7.X (5116411-100)" to Rev 12. Added "Installation Forms: LS7.X". |
|
Align, Setup, Cals > Gantry : Updated "Scan Window Alignment".
|
Software : Removed "Common Service Desktop GUI Layout" and "zalignmentWizard User Instructions" ("Wizard" is already in Functional Checks > Gantry). -
> Software Installation Procedures (LFC) : Added "07MW18.x SW LFC (LS7.X)". Added non-Limited Access version software install procedures: "06MW03.4 SW LFC (LS7.X)", "05MW31.x SW LFC (LS7.X)", and "05MW10.2 SW LF15C (LS7.X)".
-
> HV Subsystem Utilities : Added "Tube Usage Statistics (07MWxx.x and later)".
|
|
Troubleshooting : Updated "System Troubleshooting Tool" (moved from "Software" folder) > Image Quality : Added "Quick Snap and IQ Snap Data Archive and Shipping Procedures
|
Replacement-
> Gantry > Axial : Added non-Limited Access version "Axial Encoder Assembly Replacement"
-
> Gantry > DAS and Detector : Updated "48VDC PS and Fuse Board Replacement".
-
> Gantry > High Voltage : Updated "HV Tank Replacement".
-
> Gantry > Tilt : Updated "Hydraulic Tilt Motor Assembly Replacement".
-
> Gantry > Tube : Updated "Tube Replacement - LightSpeed VCT".
|
| 3 |
Nov. 30, 2006 |
Added VCT XT applicability. |
Install (Includes Pre-Installation)-
Updated "Pre-Installation Manual: LS 7.X (Dir 5116410-100, Rev 8)"
-
Updated "Installation Manual: LS 7.X (Dir 5116411-100 Rev 9)"
|
| Align, Setup, Cals > Gantry > Tube : Updated "Z-Align"
|
| System Diagrams Updated "VCT DAS Detector Backplane Map"
|
| Parts Updated "GOC5 Illustrated Parts List (Dir 5135498-100)"
|
| Replacement
|
| 2 |
Nov. 9, 2006 |
Align, Setup, Cals
|
Software > Software Installation Procedures (LFC)-
Updated "06MW29.7 SW LFC (LS 7.X)"
-
Updated "05MW31.x SW LFC (LS 7.X)"
-
Updated "VCT Console Information Sheet"
-
> Appendixes - Troubleshooting : - Updated "Change VDARC BIOS Boot Order Settings"
- Updated "VDARC/DARC Node OS Load Troubleshooting"
|
| Theory > Console : Updated "LCD Video Monitor Overview"
|
Replacement- > Gantry > Collimator :
- Updated "Cam Drive Motor and Flex Coupling Replacement".
- Updated "Lexan Removal".
- > Gantry > DAS and Detector : Updated "VCT Backplane Replacement Procedure".
- > Gantry > Tilt : Updated "Tilt Potentiometer Replacement"
|
| 1 |
Oct. 17, 2006 |
Initial Release (for Limited Access Compliant Systems) |