• Topic ID: id_16157950
  • Version: 1.0
  • Date: Jul 7, 2018 4:33:32 PM

Saving System State

To save the system configuration information, characterization, calibration, protocols, etc. to a System State DVD (or MOD for Octane systems), perform the following tasks:

  1. Bring the system up if it is not already up.

  2. Insert the System State DVD (or MOD).

  3. Click on the SERVICE DESKTOP.

  4. Click on PM.

    note:

    On systems with GRE Console that have newer software (e.g. GRE Common Applications software version 04MW13.4 or later), the System State selection is located under UTILITIES.

  5. Click on SYSTEM STATE.

  6. Click on ALL. This will highlight Cals, Characterization, Reconfig Info, etc.

  7. Click on SAVE.

    The save will take a few minutes. Review the output for errors or missing files; the scroll bar on the right works only when the tool isn’t busy performing some task, it may take a little while. If you see any missing files or failures, then refer to the note below.

  8. Click on DISMISS.