• Topic ID: id_16157998
  • Version: 1.0
  • Date: Jul 7, 2018 4:29:50 PM

General Information

1 Introduction

This Appendix contains the following “how to” procedures that may be useful during a software load:

  • Remote Shell - Check Internal Network.

  • HP Computer CD-ROM - Mount and Unmount Process.

  • Peripheral Tower DVD - Mount and Unmount Process.

  • Peripheral Tower DVD - Initializing a DVD.

  • Peripheral Tower MOD - Mount and Unmount Process.

2 Procedures

2.1 Remote Shell - Check Internal Network

  • To become root within a Unix Shell:

    1. Type: su -Enter.

    2. Type the root password: #bigguyEnter.

  • To check the internal network as root, type: rsh darcEnter.

    1. Type: exit to close root@darc shell, or to check IG1, type: rsh ig1Enter.

    2. Type: exit to close root@IG1 shell and exit to close root@darc shell.

    3. Close the Unix Shell.

2.2 HP Computer CD-ROM - Mount and Unmount Process

  1. Insert the CD into the HP Host Computer DVD ROM drive.

  2. Open up a Unix Shell and type these commands:

    1. ctuser: su -Enter.

    2. password: #bigguyEnter.

    3. root: mount /mnt/cdromEnter.

  3. The CD has now been mounted. You can see what is on it by typing:

    ls /mnt/cdrom Enter.

  4. You must unmount the CD to remove it from the drive; do this by typing:

    umount /mnt/cdrom Enter.

2.3 Peripheral Tower DVD - Mount and Unmount Process

  1. Insert the DVD into the Peripheral Tower DVD RAM drive.

  2. Open up a Unix Shell and type: mountDVDEnter.

  3. Now the DVD has been mounted. You can see what is on it by typing:

    ls /DVD Enter

  4. You must unmount the DVD to remove it from the drive; do this by typing:

    unmountDVD Enter

2.4 Peripheral Tower DVD - Initializing a DVD

If a DVD needs to be initialized on new media, open a Unix Shell and perform the following:

  1. Type: su -Enter.

  2. Enter the root password: #bigguyEnter.

  3. Type: mountDVDEnter.

  4. Type: mkfsDVDEnter; answer y for yes and close the Unix shell.

2.5 Peripheral Tower MOD - Mount and Unmount Process

  1. Insert the MOD into the Peripheral Tower MOD drive.

  2. Open up a Unix Shell and type: mountMODEnter.

  3. Now the MOD has been mounted. You can see what is on it by typing:

    ls /MOD Enter.

  4. You must unmount the MOD to remove it from the drive; do this by typing:

    umountMOD Enter.

    note:

    If MOD cannot be unmounted, select: Image Works > Archive > Detach.